CSR-155

SPT, CPT & Wireline Rotary Core Test Drill Rig

The new CSR-155 soil test drill rig is a compact and powerful rig for SPT, CPT, wireline coring and rotary drilling. The CSR-155 has the versatility to auger drill, rotary/mud drill, wireline rotary core drill, SPT hammer test and full-function CPT test in ONE compact track mounted drill rig. This drill rig is a first in the industry.

The Crossover Rig (CSR-155) has a three-drilling position mast. Position one has an incredibly powerful 4-speed drill motor gearbox with a built-in heavy duty wet swivel. Position two has a powerful auger drive to do virtually any type of auger drilling. Position three features our unique custom hydraulic clamp style CPT drive head.

Request a quote

Request a quote

A valid Full Name is required.
A valid E-mail address is required.

By submitting this form you hereby authorize TMG Manufacturing, to send you periodic emails.
Email information is not shared with anyone else outside of TMG Manufacturing.

×
Download the brochure

Specifications

Engine

  • 55 hp (41 kW), Yanmar tier 4 compliant, turbo charged diesel engine
  • Water cooled
  • 1.96 liter displacement (1995 cc)
  • Radiator cooling system
  • 12 V electric start
  • 2300 rpm
  • Direct injection
  • Emergency stop button
  • Rpm gauge
  • Oil pressure gauge
  • Oil level light

Hydraulic System

  • Hawe hydraulics power unit
  • 48 gpm (181 lpm) max combined hydraulic flow
  • Max 3000 psi (206 bar)
  • Load sensing variable displacement axial piston pump
  • Feather touch controls
  • Oil cooler
  • In-tank oil filter

Track System

  • Stationary track system (300 mm wide 1727 mm long - 11.8” wide 68” long)
  • NACHI 3B track motor with automatic brake system
  • Built-in grease filled tensioning arm and spring

Mast

  • 20 or 10 ton dual-cylinder mast for CPT, SPT, auger and rotary drilling
  • External rotary sensor for CPT operations
  • 4” (10.16 cm) ID cylinder with 2” (5.08 cm) cylinder rods
  • 7 ft (2.13 m) stroke
  • Max 20 ton (57,000 lbs) pull down force
  • Max pull up force 5,669 kg (12,500 lbs)
  • Travel speed control (for CPT 2 cm/sec)

Telescopic Winch Tower

  • 16 ft (4.8 m) max height (longer travel available)
  • Dual pulley system - SPT rope pulley and wireline pulley

SPT Hammer System

  • Rotary capstan system for manual SPT hammer (SPT hammer sold separately)

Pipe Clamp

  • Single pipe/rod bottom clamp
  • Size capability from 1.5” to 6” (Other sizes available)

Leveling Outriggers

  • 4 hydraulic level outriggers with independent controls

Mud Pump

  • Moyno 3L6 (or equivalent) continuous flow stator/rotor style mud pump
  • Up to 225 psi (15.5 bar)
  • 50 gpm flow (189 lpm)
  • Independent hydraulic motor
  • Quick coupling
  • Mounted on drill rig frame

Lifting Winch

  • 4,500 lbs (2,041 kg) lift capacity
  • Planetary gear with break
  • Balance weight and locking hook
  • ¼”- ½” (6-12 mm) rope diameter

Second Winch

  • For wireline operations
  • 1,000 lbs (453 kg) lift capacity
  • 20 ft/sec travel speed

Drive Head

  • 2-position drill head (rotary & auger drill, and CPT head)

Drill Motor 1 - Rotary Gearbox MS-400

  • Gear 1: 902 rpm at 357 ft lbs (484 Nm) torque
  • Gear 2: 451 rpm at 714 ft lbs (968 Nm) torque
  • Gear 3: 225 rpm at 1427 ft lbs (1934 Nm) torque
  • Gear 4: 113 rpm at 2855 ft lbs (3870 Nm) torque
  • Built-in heavy duty wet swivel (see bellow)

Heavy Duty Wet Swivel

  • Top intake
  • 18,000 lbs (8,160 kg) load capacity
  • Quick change connectors (AWJ, AW, BW, BQ, NW, NQ, HW, HQ, PW, PQ) others available
  • Automatic spring floating system

Drill Motor 2 - CPT

  • Top down CPT push system

CPT Equipment

  • Standard equipment
  • Controller datapack with data acquisition software
  • Cone - 10 or 15 cm, 10 or 20 ton penetrometer, with friction sleeve, pore pressure transducer and dual axis inclinometer
  • 40 meters cable
  • 30 x 1 meter long cone rods
  • Cylinder-mounted marker with encoder
  • Interface, elect-hydraulic drive with head load
  • Spare parts:
    • 8 x piezocone cone tips
    • 8 x piezo filter HT (10 per pkg - in silicone)
    • 4 x friction sleeve
    • 2 x retaining O-ring kit
    • 4 x cone O-ring kit
  • Other equipment options available

Fuel Tank

  • 13 gallon (50 liters) fuel tank with fuel sending sensor

Hydraulic Oil Tank

  • 55 gallon (208 liters) hydraulic oil tank with built-in site level glass

Accessories

  • Auxiliary U.S.B. charger
  • Battery charger
  • CPT rod rack
  • PC/Tablet & CPT data logger holder

Depth Capacity

  • 250-325 feet of depth

Options

  • Full function remote control for all drilling and driving operations
  • Automatic drop hammer 140 lbs (63 kg)
  • Manual drop hammer 140 lbs (63 kg)
  • Dual pipe clamp with breakout
  • TMG's unique hydraulic clamp push system
  • PC/Tablet
Subscribe to our mailing list and get e-mail updates of our products.
Subscribe

Subscribe to our mailing list

×
Stay connected. We would like to see you on our social networks!